Sphinganine‐Like Biogenesis of (E)‐1‐Nitropentadec‐1‐ene in Termite Soldiers of the Genus Prorhinotermes

In 1974, (E)‐1‐nitropentadec‐1‐ene, a strong lipophilic contact poison of soldiers of the termite genus Prorhinotermes, was the first‐described insect‐produced nitro compound. However, its biosynthesis remained unknown. In the present study, we tested the hypothesis that (E)‐1‐nitropentadec‐1‐ene biosynthesis originates with condensation of amino acids with tetradecanoic acid. By using in vivo experiments with radiolabeled and deuterium‐labeled putative precursors, we show that (E)‐1‐nitropentadec‐1‐ene is synthesized by the soldiers from glycine or L ‐serine and tetradecanoic acid. We propose and discuss three possible biosynthetic pathways.     

Effects of microelements on soil nematode assemblages seven years after contaminating an agricultural field

Long-term effects of Cd, Cr, Cu, Se and Zn were studied 7 years after artificially contaminating plots of an agricultural field on a calcareous chernozem soil. Effects of three to four different contamination levels (originally 10, 30, 90 and 270 mg kg⁻¹) were studied. Nematode density was significantly reduced by 90 and 270 mg kg⁻¹ Se as well as by 270 mg kg⁻¹ Cr, while 90 and 270 mg kg⁻¹ Se also reduced nematode generic richness. Maturity Index values (calculated for c-p 2–5 nematodes) consistently decreased with increasing Cr and Se concentration and to a lesser extent in Zn plots as well. Structure Index showed decreasing trends in increasing Cr, Se and (to a lesser extent) in Zn treatments, while in Cd it shows a moderate increase. Distribution of c-p groups was negatively affected by the increasing Cr and Se concentration, while in Zn plots, this decrease was not significant. Response of feeding groups to pollutions was similar to other parameters: Cr and Se caused significant changes toward the loss of variability. The proportion of the most sensitive omnivorous and predatory nematodes decreased clearly as a consequence of Cr and Se treatments. Zn pollution also resulted in a slight decrease in this group, while Cd caused an increase. Nematode diversity profiles showed a significant decrease in the plots of increased Cr and Se concentrations, while increased concentrations of Cu and Zn resulted in ambiguous effects. Besides providing evidence on the harmful effects of Cr and Se on a soil nematode assemblage, our results suggest that simultaneous analysis of Maturity Index, Structure Index and diversity profiles provide a promising tool in nematological indication of soil pollution.     

Deformation and Fracture of β‐Silicon Nitride Micropillars

Room‐temperature deformation and fracture behaviors under microcompression of single crystal β‐silicon nitride (Si₃N₄) micropillars were investigated. Pillars were fabricated by focused ion beam (FIB) in large Si₃N₄ grains, located close to the basal and prismatic orientations, selected by electron backscatter diffraction (EBSD). The micromechanical test and the damage characterization were performed by nanoindentation and scanning electron microscopy (SEM), respectively. The elastic, plastic, and fracture properties, such as Young's modulus, yield stress, and rupture stress are considerably influenced by the pillar orientation. The activation of the type slip system was identified in case of basal oriented micropillars.     

Multiscale approach to the morphology,structure, and segmental dynamics of complex degradable aliphatic polyurethanes

A multiscale approach spanning from the segmental (subnanometer) up to micrometer level was applied for detailed study of the self‐assembly of aliphatic block polyurethane (PU) elastomers. To understand the principles of the self‐organization of hard and soft segments in the complex multi‐component systems, several two‐component model PU samples, that is, the products of 1,6‐diisocyanatohexane (HDI) with three diols differing in the length and constitution were also prepared, characterized, and investigated: (i) polycarbonate‐based macrodiol (MD), (ii) biodegradable oligomeric diol (DL‐L; product of butane‐1,4‐diol and D,L‐lactide), and (iii) butane‐1,4‐diol (BD). The study (particularly ¹³C‐¹H PILGRIM NMR spectra) reveals complex internal organization and interesting (application appealing) behavior of multi‐component PUs. Hard segments (HDI+BD products) feature self‐assembled and significantly folded chain conformations with interdomain spacing 15–22 nm (small‐angle X‐ray scattering analysis). The small domains are hierarchically assembled in various structural formations of µm size (spherulites) depending on PU composition, as detected by transmission electron microscopy and atomic force microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41590.     

Rheological properties of hydroxyl‐terminated and end‐capped aliphatic hyperbranched polyesters

The rheological behavior of two series of aliphatic hyperbranched (HB) polyesters, based on 2,2‐bis(hydroxymethyl)propionic acid (bis‐MPA) and di‐trimethylol propane (Di‐TMP) as a tetrafunctional core, was studied. The effect of the size (pseudo‐generation number, from second to eight) and structure on the melt rheological properties was investigated for a series of hydroxyl‐terminated HB polyesters. In addition, the influence of the nature and degree of modification of the terminal OH groups in a series of fourth‐generation polyesters end‐capped with short and long alkyl chains and some aryl groups on the rheological properties was analyzed. The time–temperature superposition procedure was applied for the construction of master curves and for the analysis of the rheological properties of HB polyesters. The data obtained from WLF analysis of the HB polyesters showed that the values of the thermal coefficient of expansion of free volume α_f and the fractional free volume at the glass transition temperature, f_g, increase with increasing size of the HB polyesters. It was shown that the modified HB polyesters exhibited lower T_g and T_G′=G″ temperatures, above which viscous became dominant over elastic behavior. From an analysis of the master curves of the modified HB polyesters, it was observed that with increasing degree of modification, both storage and loss modules and complex dynamic viscosity and apparent energy for viscoelastic relaxation decrease, because of reduced intermolecular hydrogen interactions. They do not exhibit a plateau of rubbery behavior, which confirms that no entanglements are present and that the molar masses are below the critical molar mass. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41479.     

Polypropylene/silica micro‐ and nanocomposites modified with poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)

The effects of different silica loadings and elastomeric content on interfacial properties, morphology and mechanical properties of polypropylene/silica 96/4 composites modified with 5, 10, 15, and 20 vol % of poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) SEBS added to total composite volume were investigated. Four silica fillers differing in size (nano‐ vs. micro‐) and in surface properties (untreated vs. treated) were chosen as fillers. Elastomer SEBS was added as impact modifier and compatibilizer at the same time. The morphology of ternary polymer composites revealed by light and scanning electron microscopies was compared with morphology predicted models based on interfacial properties. The results indicated that general morphology of composite systems was determined primarily by interfacial properties, whereas the spherulitic morphology of polypropylene matrix was a result of two competitive effects: nucleation effect of filler and solidification effect of elastomer. Tensile and impact strength properties were mainly influenced by combined competetive effects of stiff filler and tough SEBS elastomer. Spherulitic morphology of polypropylene matrix might affect some mechanical properties additionally. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41486.     

MA‐NOTMP: A Triazacyclononane Trimethylphosphinate Based Bifunctional Chelator for Gallium Radiolabelling of Biomolecules

In the past few years, gallium‐68 has demonstrated significant potential as a radioisotope for positron emission tomography (PET), and the optimization of chelators for gallium coordination is a major goal in the development of radiopharmaceuticals. Methylaminotriazacyclononane trimethylphosphinate (MA‐NOTMP), a new C‐functionalized triazacyclononane derivative with phosphinate pendant arms, presents excellent coordination properties for ⁶⁸Ga (low ligand concentration, labelling at low pH even at room temperature). A “ready‐to‐be‐grafted” bifunctional chelating agent (p‐NCS‐Bz‐MA‐NOTMP) was prepared to allow ⁶⁸Ga labelling of sensitive biological vectors. Conjugation to a bombesin_(7–14) derivative was performed, and preliminary in vitro experiments demonstrated the potential of MA‐NOTMP in the development of radiopharmaceuticals. This new chelator is therefore of major interest for labelling sensitive biomolecules, and further in vivo experiments will soon be performed.     

Force‐Driven Single‐Atom Manipulation on a Low‐Reactive Si Surface for Tip Sharpening

A single atomic manipulation on the delta‐doped B:Si(111)‐()R30° surface using a low temperature dynamic atomic force microscopy based on the Kolibri sensor is investigated. Through a controlled vertical displacement of the probe, a single Si adatom in order to open a vacancy is removed. It is shown that this process is completely reversible, by accurately placing a Si atom back into the vacancy site. In addition, density functional theory simulations are carried out to understand the underlying mechanism of the atomic manipulation in detail. This process also rearranges the atoms at the tip apex, which can be effectively sharpened in this way. Such sharper tips allow for a deeper look into the Si adatom vacancy site. Namely, high‐resolution images of the vacancy showing subsurface Si dangling bond triplets, which surround the substitutional B dopant atom in the first bilayer, are achieved.     

On the solid state heat transport phenomena measurement

The paper deals with theoretical and experimental aspects of lumped capacitance model (LCM) application for the study of heat transport in different materials. Patented construction of the measuring chamber together with special software the fundamental features of which are presented here allows evaluating thermal conductivity k, specific heat capacity c_p and thermal diffusivity α. Obtained results are in relatively very good agreement with those obtained from independent measurement or table values.